Home / Shop
RASA 11 Cable Guides
- Description
- Customer Reviews (0)
This is our RASA 11 cable guide that is 3D printed to fit a Celestron RASA 11 with a ASG Photon Cage. It is specifically designed for the RASA 11 and provides either a Maximum Diffraction spike generator with our 90 degree system OR a Minimum Diffraction spike generator with our curved model.
Key Features
This is designed to slide smoothly onto your RASA 11 outer visor. You can tape your power and USB cables to each guide keeping a nice organized loop to your cabling. You can use this with our without a Photon Cage. Simple to use and easy to install!
Maximum cable guide provides accurate 90 degree cable guiding and will generate large star spikes in a perfect 4 spike pattern. It also offers clocking mechanisms with slotted groves to align with the declination pins on the outside of your RASA 11. We also provide post guides if you utilize the Photon Cage so it will be oriented in the RA/Dec axis as well.
Minimum cable guide provides curvature to help minimize any diffraction spikes. It will not completely eliminate but is a good alternative to create nice round stars with minimized spikes. This cable guide also comes with slotted groves to fit on your RASA 11 in the same orientation every time. If you have a Photon Cage, it will come in under your cage's outside diameter for easy routing of cables.
Special Note: 3D Printed Parts
For anyone not familiar with 3D printed parts, there will be varying degrees of blemishes that are across the varying surfaces. They are not machined parts, nor do we sell them as such, and when you receive parts that are 3D printed there will be some degree of blemishes somewhere on them. We fully stand behind them as working products and if for some reason they are not workable products, we will work to make it right. Just know it's 3D printed plastic!
Add a review for RASA 11 Cable Guides
Related Products
-
3D Printed
-
3D Printed
-
3D Printed
-
3D Printed
